Vacuum Pump:Positive Displacement pump. Specially designed ultra-efficient air injection cooling system
CFM: 5,300
Vacuum: 27" Hg
Transfer Case: Split-shaft PTO with air shift engagement
Cyclones: Seven
Filter Bags: 46 Snap-ring type with heavy duty galvanized cages
Filtration: Patented single mode filtration eliminates wet or dry changeover
Filter Access: Safe working area on top of collector body
Payload: 17 Cubic yards
Material: 1/4" EXTEN Steel Collector Body
Tailgate: Full opening door with field-adjustable hinge and dual cylinders
Tailgate Locks: Four fail-safe, individually adjustable locks that assure seal
Body Dump: Heavy duty, double acting cylinder provide a stable 45 degree dump angle
Surface Prep: Body and components blasted to near white per SSPC specs

72" Dump height in fully raised position with body down

61" Dump height in fully raised position with body dumped

22" Rearward travel - No need to move the truck with body elevated

• Noise and vibration dampening mounts on blower and transfer case
• Ultra quiet exhaust and intake silencers
• 12" Stainless steel liquid shut off float ball
• Easy decon cyclone system
• " Stainless steel tube sheet resists corrosion and simplifies bag replacement
• 20" Body access manway
• Debris body semi-circular material baffle with surge bar
• Stainless steel "sure seal" sealing surface on tailgate and dump chutes
• Field adjustable baghouse doors, easy-open, no power assist required
• All clean-outs adjustable
• Full bearing body pivot pin
• Blower hour meter and temperature gauge
• Custom engineered, stainless steel, vee-wire micro safety screen
• Top loading debris backed debris body inlet - long life design resists abrasion
• Heavy duty rear mounted 8" port hose with ground level connection
• Port hose rotation flange
• Three (3) tie-off points on top of body 6' apart
• 50 Gallon hydraulic tank
• Heavy duty electric vibrator with thermal overload protection
• Full length aluminum fenders
• Super heavy duty rear splash plate
• Two adjustable sealed-beam work lights on tailgate
• Body and Tailgate safety props

• Stainless steel debris tank upgrade, grade 304L or 316L available
• Stainless steel filtration material upgrade, grade 304L or 316L available
• Belzona 5811 polymer coating in debris tank or filtration system
• Safety / remote vacuum relief system
• Vulkan vibration dampener on vacuum pump
• Tailgate splash shield
• Liquid load indicator
• Decant valve
• Heavy duty grounding cable
• Tool boxes available in painted steel, aluminum, or polished stainless steel
• Heavy duty pintle plate with dual gusset reinforcement
• Patented auger unloading system
• Sludge pump offload system mounted on the tailgate
• Remote wired pendant controlled vacuum relief valve and throttle
• Wireless controlled vacuum relief valve and throttle
• Hydraulic vibrator upgrade
• 3 GPM / 2000 PSI wash down system
• Additional work lights
• Check valve at blower
• Vacuum loading boom
• Sound enclosure system
• LED lighting
• Strobe or LED beacons, flashers, arrow lights, cab bar light